Apply for an Instant Trade Account
Best Selling
Grid
List
Water Leak Detection Sensor Probe
Water Leak Detection Sensor Probe
Sensor Probe: Adjustable height from the floor between 0 and 25mm. Protective cover helps stop accidental damage. Multiple sensors can be linked in series to cover large areas. The sensor probe would be used in situations where either only a single point is important (such as a bund) or where a sensor tape might get damaged by foot traffic or some other process. A...
1000 Litre GRP Water Tank - Two Piece Insulated
1000 Litre 2 Piece GRP Water Tank - Insulated (25 mm) Full WRAS approval
Please note the 1000 Litre stock tank is available as the 25mm insulation Only. Please see the following link for the stocked tank PW1000-2.
50mm insulation, support stand and baseboards.
Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance...
2 Drum Spill Pallet
2 Drum Spill Pallet - BP2
Polyethylene drum and barrel bund spill pallet, designed for the safe and compliant storage of 205 litre drums.
UDL: 650Kg
240 litre sump
Designed for 2 x 205L drums
Corrosion free
EC and UK Compliant oil storage
Compatible with most liquids
Forklift pockets
Removable plastic grids
Charles Austen Air Blower ET200
Designed for use in sewage aeration applications, the Charles Austen ET Enviro air pump range is situated outside the sewage treatment for aeration of waste water in the first stage of treatment. Other applications include aeration for Koi ponds and spa's/whirlpools, rainwater harvesters, cellar emptying, swimming pool emptying, flood prevention and fuel cell manufacture.
Key Features
Green...
32 mm x 25 mtr MDPE Pipe
32 mm x 25 MTR MDPE Pipe
Manufactured from medium density polyethylene (MDPE), which is designed to stay firm against the surface stress it receives underground. It can withstand up to 12 bar pressure.
32mm Medium-density polyethylene, sold in a coil of 25 metres. Suitable for use below ground on cold water services.
Key Features
32mm Black MDPE pipe.
Length of 25 metres.
12 Bar...
1900 Litre Horizontal Water Tank
1900 Litre Tanks Direct Horizontal Water Tank
1900 Litre (Approx 418 Gallons) water storage tank.
This quality Tank's Direct water tank is suitable for rainwater harvesting & water storage, as well as irrigation or fire suppression applications.
Supplied complete with:
2" Fill Point and Screw Cap
5" Inspection Point and Screw
Vent
1” BSP Bottom Outlet
Tank...
BF/BG LOCKING ELEMENT
BF Bottom Pulley Locking Element
This locking element can be used both on the BF and the BG sewage treatment systems. It is used to clamp the bottom pulley onto the main shaft.
DESO Metal Keys and Lock Barrel
DESO Metal Keys and Lock Barrel
Spare metal keys (comes as pairs) with a replacement lock barrel for most DESO bunded oil tanks from 2010.
1' BSP Ball Valve WRAS
1' WRAS approved BSP ball valve
Removable Handle for security
Positive click open
Smooth open & close action
Non corrosive materials
Pressure rating16 Bar/235 PSI @ 20 degrees
Material meets potable water standards 'WRAS' approved
Enduramaxx 1250 Litre Water Tank, Potable
1250 Litre Enduramaxx Potable Water Tank
This Enduramaxx 1250 litre (280 Gallon) above ground water tank is made from a Medium Density Polymer (MDP). Suitable for the storage of potable drinking water. The tank has lifting eyes for ease of offloading from a vehicle or for moving from one place to another (Please ensure the tank is empty of water before attempting this) On the top of the tank is...
Double IBC / 8 Drum Covered Spill Pallet Bund
2 IBC/ 8 Drum Covered Spill Pallet Bund
Polyethylene drum bund spill pallet with cover, designed for the safe and compliant storage of 205 litre drums and 1000 Litre IBC's.
Designed for 8 x 205L drums
or for 4 x 205L drums - 2 x 1000 Litre IBC's
or for 2 x 1000L IBC's
Corrosion free
EC and UK Compliant oil storage
Compatible with most liquids
Forklift pockets
Removable...
2000 Litre GRP Sectional Water Tank, Internally Flanged Base (IFB)
2000 Litre Sectional Water Tank, Internally Flanged Base (IFB)
2000 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and externally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.
Insulated and WRAS approved for use with potable water. Suitable for a variety of applications including process cooling, rainwater harvesting...
800 Litre Water Tank,
800 Litre Flat Baffled Water Tank
Our 800 Litre (175 gallon) Water tanks are suitable for storage and transportation of potable water and a wide range of other liquids. Capacity: 800 Litres. This baffled water tank is manufactured in natural translucent medium density polyethylene with a 1" BSP outlet and 8" lid. Baffles are designed to strengthen and support the structure of the tank...
Polytank CL50 Lid Only
Polytank CL50 Lid Only
Lid to fit (POLYTANK C50 Only) 50 gallon circular loft tank.
Specifically engineered to enhance the performance and longevity of your water storage system, making it an essential addition to any residential or commercial application.
The Polytank CL50 lid is meticulously designed to seamlessly fit the Polytank C50 water storage tank, ensuring a secure and precise fit....
4' Male BSP Outlet
4' BSP Male outlet made from glass reinforced Nylon.Approx thread outside diameter measurement 113mm
BA-BB Biodisc Drive Assembly Kit 4 (Pre 2006 models)
BA-BB Biodisc Drive Assembly Kit 4 (Pre-2006 models)
This is for the Pre-2006 Models of the BA/BB Bio Disc. This is a full drive assembly replacement kit including the motor, capacitor, belt, both pulleys & locking element.
The BA-BB Bio Disc Drive Assembly Kit 4 includes :-
Kingspan BA/BB Biodisc Motor - 1015023
Long 1600mm Belt - 0012828
Top Pulley - 0013725
Bottom Pulley -...
12 Gallon / 55 Litre Cold Water Loft Tank
Polytank 12 Gallon / 55 Ltr Cold Water Loft Tank (20-12-20)
All rectangular POLYTANK Cold Water Loft Tanks come complete with the PT kit inside the tank.
PT2 Package consists of:
Snap on Polylid
POLYTANK Byelaw 30 kit and fitting instructions
1/2" BS1212 Part 2 ball valve and 41/2" float
Ball valve backplate
22 mm compression tank connector
15 mm x 1/2" angled...
230 Litre Norway Garden Water butt
Norway 230 Ltre Water Butt
With a highly realistic, deeply grained and ultra matt finish modelled on real wooden shingles from Nordic spruce. The Norway offers a compact, space-saving form and small footprint. Suitable for use in even the smallest gardens, the Norway will stand flat against walls, fences, or garden sheds. The Norway features brass ¾' connection points for a screw in tap...
20 Gallon / 91 Litre Cold Water Loft Tank
Polytank 20 Gallon / 91 Litre Cold Water Loft Tank (24-15-24)
All rectangular POLYTANK Cold Water Loft Tanks come complete with the PT kit inside the tank.
PT2 Package consists of:
Snap on Polylid
POLYTANK Byelaw 30 kit and fitting instructions
1/2" BS1212 Part 2 ball valve and 41/2" float
Ball valve back plate
22mm compression tank connector
15mm x 1/2" angled...
40 Gallon / 182 Litre Framed Cold Water Loft Tank
40 Gallon / 182 Litre Framed Cold Water Loft Tank DescriptionPolytank 40 Gallon / 182 Ltr Framed Cold Water Loft Tank (23-23-28)
All framed POLYTANK Cold Water Loft Tanks come complete with the PT kit inside the tank
Includes PT2/C Package consisting of:Snap On Polylid
1/2' BS1212 Part 2 Ballvalve
Ballvalve Backplate 4 1/2' Float
22mm Compression Tank Connector
Byelaw 30 kit & fitting instructions
15mm...
Charles Austen Air Blower ET120A
Charles Austen Air Blower ET120A
The ETA series range of air pumps ensures that there is plenty of water movement in wastewater applications; this boosts oxygen levels in the water, allowing aerobic bacteria to decompose. When used in medical applications, the ETA series provides a high low at low pressure. Enviro ETA pumps come with a built in alarm which detects low pressure in the airline.
...
BG Motor Gearbox (Bauer)
BG Motor Gearbox (Bauer)
This Bauer BG40 Motor/Gearbox is used with the Klargester BG Biodisc units.
Supply: 230V/50Hz/1PH
Output power: 0.180 kW
Output torque: 280 Nm
Output speed: 6.1 rpm
Enclosure: IP65 Rated
Airline Regulating Valve 3/4'
Airline Regulating Valve 3/4''
3/4 inch airline valve for P18 to P25 unit's
.png)
Klargester PSTOR18E Range
The new Kingspan Klargester extended PSTOR Horizontal Pump Range, is engineered for reliable performance offering complete peace of mind.
The new range offers a simplified and economic alternative providing two new options including a 1.8m and 2.8m diameter tank size, with a range of capacities from 8000 - 79000 litres.
In the event of power supply failure, this packaged pumping station swiftly...
Wall Feeder
JFC EQ11 Wall Feeder
The JFC Wall Feeder is extremely durable and finished with a smooth, seamless finish for ease of cleaning. Designed with innovate features to prevent feed spillage and waste.
Specification
3 mounting holes on the back for secure fitting against a wall or post.
Fitted with a drain-off plug (13mm) for easy cleaning.
Rim designed with a feed retention lip to minimise...
Aquamaxx 450 Litre Cold Water Tank, Single Pump Booster set
Aquamaxx 450 Litre Cold Water Tank with a Single Pump Booster set
The Aquamaxx has been specifically designed for smaller properties with low water pressure and flow where space is at a premium. Areas such as apartments, cottages and town houses would benefit the most from a compact system.
The electronic controller will automatically start and stop the pump when a drop in pressure is sensed,...
Klargester Washdown Separator - 8000 litre
Kingspan Klargester Washdown and Silt Units
Klargester Washdown and Silt units can be used in areas such as car wash and other cleaning facilities that discharge directly into a foul drain, which feeds to a municipal treatment facility.
These units can be used to serve vehicle wash down areas and car wash facilities, although it should be noted that the prime function of such separators is for...
IBC Hardcover
IBC Hardcover
A nestable IBC spill pallet with a weathertight Hard cover.
Features
Double swing doors
3 point locking mechanism
Integrated 2 litre platform spill tray
Ample headspace for IBC mixers, funnels and pumps
Inspection window and platform apertures
Integrated venting panels
Roof designed for quick rainwater run-off to the rear
Flat packed
Compatible with SJ-510-001
...
IBC Single Bund Spill Containment With Dispensing Area
IBC Single Bund Spill Containment With Dispensing Area BB1D
BB1D 86kg Fully compliant polyethylene single bund IBC secondary containment solution with integral dispensing area for 1 x 1000 litre IBC.
Integral dispensing area
Suitable for 1 x 1000 Litre IBC
Corrosion resistant
Suitable for most IBC footprints
Fork pockets for moving empty units
Delivery
All our IBC Spill...
67L CAT5 Single Variable Speed Pump Booster Set & Tank, 75l/min @ 5.0bar
67L CAT5 Single Variable Speed Pump Booster Set & Tank, 75l/min @ 5.0bar
The CAT 5 booster set also know as 'Backflow prevention booster set' incorporates a 67 Litre polypropylene break tank complete with a raised ball valve chamber with an AB air gap to WRAS approved regulations. This free standing booster set, is ideal where space is limited, as it has a small footprint of just 650mm...
Enduramaxx 15,000 Litre Water Tank, Non Potable
Enduramaxx 15000 Litre Non-Potable Water Tank
This 15000 ltr (3300 Gallon) Above groundwater tank is made from a Medium Density Polymer (MDPE). This NON-POTABLE tank comes with a 2-year guarantee. Lifting eyes to make unloading and moving the tank easier. This above ground water storage tank is ideal as a sprayer tank, rain water harvesting collector.
Has unique up stand area for installing...
ET-80 CHARLES AUSTEN BLOWER SERVICE KIT
ET-80 CHARLES AUSTEN BLOWER SERVICE KIT
The ET-80 Charles Austen Blower service kit for the includes:-
2 diaphragms
1 filter
1 magnet
Charles Austen recommend your ET pump be service every 18 months.
Note, these can not be returned once opened. Please make sure it's the correct kit for your blower.
Klargester Hillmaster PX4 Malvern 750L Twin Sewage Pumping Station
Klargester Hillmaster Malvern 750L Twin Sewage Pumping Station
The Klargester Hillmaster Malvern Range of pump stations are available as a 900mm diameter chamber with a twin pump.
Klargester Polyethylene pumping solutions ideal for small domestic properties from extensions to multiple units up to 10 residents, to comply with building regulations 24hr storage.
These solutions can be used in...
400 Litre Heavy Duty Container on Legs with Lid
400 Litre Heavy Duty Container on Legs with lid
Water and garden containers. The water and garden container range defy all weather conditions and are resistant against changing temperatures from -30°C to +40°C, briefly up to +90°C. These thick-walled containers are robust, durable and light-resistant due to the use of pure UV-stabilised HDPE material. All versions are nestable for...
Paxton 10,000 Litre Underground Water Storage Tank
10000 ltr (2000 gallon) Underground Potable or Non Potable water tank Paxton CT2200JB
This tank can be installed above or below ground. Versatile storage tanks suitable for liquids. Manufactured in robust one-piece stress-free mouldings with smooth hygienic internal and external surfaces. Built-in lifting lugs for handling empty tanks. Suitable for potable water when fitted with byelaw 30 kit. Tank...
Pack (2) 1.2 Metre Evo Red and White Road Traffic Safety Barriers
Pack of two Evo Safety Barriers one Red, one White
Each barrier is 1200mm Long x 800mm High x 400mm Wide
Wind Speed Tested Road Barrier
Easily linked
Designed to create a solid wall leaving no gaps between each other when linked together.
Quantity per pallet is 12 barriers - Quantity per full load is 350 barriers
Check out our full range of traffic management:
Pedestrian Barrier Systems,...
BA Rotor Assembly Complete
BA Rotor Assembly Complete
Full rotor pack for 1 x BA Biodisc
This product is made to order, lead time 2 to 3 weeks.
Klargester Washdown Separator - 4000 litre
Kingspan Klargester Washdown and Silt Units
Klargester Washdown and Silt units can be used in areas such as car wash and other cleaning facilities that discharge directly into a foul drain, which feeds to a municipal treatment facility.
These units can be used to serve vehicle wash down areas and car wash facilities, although it should be noted that the prime function of such separators is for...
1125 Litre Site Water Bowser
1125 Litre (250 Gallon) Site Water Bowser
Industrial water bowser for transporting and storing water. Site bowsers are fitted with a welded 40mm ring eye tow hitch as standard (a 50mm ball is optional). They have no suspension, brakes, lights or mudguards and are mainly for static operation or slow speed off highway use, they shouldn't be towed at speeds exceeding 10 MPH.
Chassis - Constructed...
800 Litre Rainwater Tank with Filter
800 Litre Rainwater Tank with Filter
Tank
This water butt wall tank is a rainwater tank designed to fit close onto the wall.
Supplied with metal safety bracket for extra security.
This bracket is mounted on the wall and prevents the tank from tilting.
The inlet is made through a down pipe filter.
You can easily connect 2 or more tanks together with a 3/4" Tank to Tank Set...
Klargester Gamma 4,000 Litre Septic Tank - Twin Stage
Klargester Gamma 4000 Litre Septic Tank - Twin Stage
The Twin Stage Gamma Septic Tanks have an internal partion wall. This makes your tank work even better and fits the Scottish regulation for tank installations.
Kingspan Klargester has developed Gamma as a direct response to market needs, an affordable and reliable septic tank that is easy to install in a range of domestic applications....
3/4' Hose Joiners
3/4" Hose Joiners
3/4" Hose Joiners used in P018-25 BioTec
Materials: Blue Tefen Plastic
Hose Joiners are used to connect 2 hoses together to extend the reach of your water flow beyond a single hose length.
Ballast Block
Ballast Block for Telescopic Height barriers
This Ballast Block is for water filling and is designed with a bolt down base to give added stability to the Goal post systems.
It is an all round non-conductive product, so when used with the extendable goal posts it provides extra safety and strength to the variations in height when necessary.The Ballast block is stackable for storage or transportation....
Double IBC Spill Pallet with Fourway Access
Double IBC Spill Pallet - BB2FW
Suitable for 2 x 1000ltr IBC this yellow polyethylene bund pallet has 4-way base fork pockets for easy access and a heavy duty load capacity.
2500Kg max load
1150 litre sump
Designed for 2 x 1000L IBC's or 8 x 205L Drums
Corrosion free
Compliant with all UK oil storage regulations
Compatible with most liquids
Fourway Forklift pockets
2 x Removable...
Enduramaxx 1000 Litre Static Tank
1000 Litre Enduramaxx Static Water Tank
This Enduramaxx 1000 Litre horizontal static plastic water storage tank is manufactured in black potable polythene, it comes with a 300mm screw lid and optional inlets and outlets. The tank is also available in 5 other colours, please see our drop down 'colour option'.
Ideal for static water storage.
If you need a horizontal tank for transport...
BF TOP PULLEY BIODISC
BF-TOP-PULLEY-BIODISC
The BF top pulley is a standard width top pulley suitable to fit the motor shaft on a Klargester BG BioDisc Sewage Treatment Systems.
The BF top pulley comes with a grub screw to lock into position
17T 5/8 Inch Duplex Pinion bored 25 mm F7
2500 Litre Bunded Diesel Dispensing Tank
2500 Litre Bunded Diesel Dispensing Tank
Deso 2500 Litre (550 Gallon) bunded Diesel tank is supplied with a 4 m hose, filter, overfill prevention and clock gauge. 12V or 240V options available.
The Extremely tight footprint is achieved by using an external pre galvanised steel frame which supports both the inner and outer skins, reducing the need for extensive internal ribbing. Gripple hooks...
215 Litre Water Tank
215 Litre Water Tank
Our 215 Litre Water tanks are suitable for storage and transportation of potable water and a wide range of other liquids. Metal inserts in the base of the tank allow for it to be bolted it to a chassis. This 215 Litre water bowser storage tank is manufactured in natural translucent medium density polyethylene with a 3/4" BSP outlet and 6" vented lid.
Optional...